Go Back  PPRuNe Forums > Aircrew Forums > Rotorheads
Reload this Page >

Conversion Training

Wikiposts
Search
Rotorheads A haven for helicopter professionals to discuss the things that affect them

Conversion Training

Thread Tools
 
Search this Thread
 
Old 27th Jul 2006, 17:17
  #1 (permalink)  
Thread Starter
 
Join Date: Apr 2006
Location: In the mountains
Posts: 445
Likes: 0
Received 4 Likes on 4 Posts
Conversion Training

What would you expect to be covered by an instructor when converting onto a new machine...?
Flyting is offline  
Old 27th Jul 2006, 18:38
  #2 (permalink)  
kissmysquirrel
Guest
 
Posts: n/a
Usually you would be taught how the machine operates compared to other types you've maybe flown. You would need to learn the systems, and cover all type specific emergency procedures. ie, you may have never flown a machine with hydraulics before and you'd need to experience failure of them.

In the UK, you would do a theory section with written exam for type. The training takes a minimum of 5 hours if converting to another SE type or minimum 8hours for first ME type.
There will be a skills test at the end of the training.
You'd possibly be taught the walkaround and what to look for.

You'll find most FTO's or TRTO's will have a conversion manual to go through which covers all elements required before test.
 
Old 27th Jul 2006, 20:44
  #3 (permalink)  
 
Join Date: Jan 2006
Location: EU
Posts: 620
Received 64 Likes on 37 Posts
SE piston to SE piston is a minimum of three hours expereince on type prior to the skills test, as part of an approved type rating course. Check LASORS for a tabulation of other conversion minimums. Rumour has it that these requirements may well change in the near future: lower for most aircraft; higher for the R22 & R44

TT
Torquetalk is offline  
Old 27th Jul 2006, 20:56
  #4 (permalink)  
 
Join Date: Jan 2005
Location: UK
Posts: 153
Likes: 0
Received 0 Likes on 0 Posts
whirlybirdsa

Maybe I'm teaching you to suck eggs, but just because the conversion course says 3, 5 or 8 hours etc doesn't mean to say that anybody will complete the conversion to the required standard in that time.
Teefor Gage is offline  
Old 27th Jul 2006, 22:58
  #5 (permalink)  

Hovering AND talking
 
Join Date: Feb 2003
Location: Propping up bars in the Lands of D H Lawrence and Bishop Bonner
Age: 59
Posts: 5,705
Likes: 0
Received 0 Likes on 0 Posts
Er, in the UK, it's 5 hours for single engine and 8 for (the first) multi-engine type rating as KMS says.

It's mostly irrelevant to be quoting hours required as these must surely vary from country/regime! I'm pretty sure it's the same in South Africa though!

Cheers

Whirls
Whirlygig is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.