Go Back  PPRuNe Forums > PPRuNe Worldwide > British Isles Aviation
Reload this Page >

Farnborough radar frequencies quality

Wikiposts
Search
British Isles Aviation The place to discuss UK, Northern Ireland and Eire aviation items of interest

Farnborough radar frequencies quality

Thread Tools
 
Search this Thread
 
Old 2nd Jun 2024, 12:08
  #1 (permalink)  
Thread Starter
 
Join Date: Nov 2008
Location: Berkshire
Posts: 22
Likes: 0
Received 0 Likes on 0 Posts
Farnborough radar frequencies quality

Not sure if this has ever been covered before but..... Has anybody noticed the really variable reception quality of the RT transmissions on Farnborough's radar frequencies, especially the Zone frequency 133.440? Approaching the airspace from the South or East for a clearance through I've often found the frequency weak and distorted even quite close to the field. Last week I flew from Kent back to Berks via Bagshot mast and the reception was so poor I very nearly diverted South around Guildford or considered trying 125.250, although that one might have been closed or bandboxed at the time. Reception improved approaching OCK just enough to understand what the controller was saying and I got an immediate clearance. Reception N of the M3 was much better, but not perfect. 125.250 also has quality issues sometimes to the South and East. I always receive other aircraft and ground stations well, I have a Trig radio which works well with no issues elsewhere. I also wonder about the suitability and quality of the headset mics in use at Farnborough and RAF radar units, the audio quality isn't great. I know the AM bandwidth isn't ideal, but in many respects I think audio quality has decreased over the years. Any comments.

(Me - 37 years ATCO, retired, 52 years pilot and counting)
Hants Eaglet is offline  
Old 2nd Jun 2024, 15:03
  #2 (permalink)  
 
Join Date: Nov 2005
Location: Wildest Surrey
Age: 75
Posts: 10,898
Received 109 Likes on 79 Posts
I'm told that when it's not too busy, Farnborough will bandbox and cross couple 133.440 and 125.250. This means that transmissions on the 8.33 kHz channel are re-transmitted on the 25 kHz one (which has offset carrier waves due to being transmitted and received at more than one site) and vice versa.
Could this explain poor reception?
(ATCO 37 yrs Retd, 60 yrs pilot)
chevvron is offline  
Old 6th Jun 2024, 16:48
  #3 (permalink)  
 
Join Date: Jul 2016
Location: Broughton, UK
Posts: 184
Likes: 0
Received 5 Likes on 3 Posts
133.440

When you say 133.440, I take it that you mean 133.441666..? As a retired radio technician, and was told the transmit was on 133.440, If I measured it to be 133.441666, the first thing I would do is tweak your master crystal oscillator..
scifi is offline  

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



Contact Us - Archive - Advertising - Cookie Policy - Privacy Statement - Terms of Service

Copyright © 2024 MH Sub I, LLC dba Internet Brands. All rights reserved. Use of this site indicates your consent to the Terms of Use.